HVAC Contractor Insurance: What to Require
What property managers commonly require from HVAC contractors: general liability, rooftop unit work, refrigerant and pollution exposure, auto and COI checks.
Property managers commonly require HVAC contractors to carry general liability of $1 million per occurrence and $2 million aggregate, workers' compensation for employees, and commercial auto for service vehicles. For rooftop or larger work, ask about pollution liability and umbrella coverage. Confirm exact limits with your insurance agent and attorney.
HVAC sits between a small repair vendor and a construction contractor. One call might be a thermostat in a single apartment, the next a crane lift onto a retail roof. If you manage 50 to 500 units with some light commercial space, you will see both. This article covers what to require from the manager's side. For the tracking workflow, see our HVAC COI tracking page. For the broader picture, see vendor insurance requirements for property managers and the property manager COI hub.
What Coverage Should an HVAC Contractor Carry?
- General liability. Covers property damage and injury from the work. Common ask: $1M per occurrence, $2M aggregate.
- Workers' compensation. Covers technicians, and HVAC involves heights, heat, electrical and heavy equipment.
- Commercial auto. Service vans carry tools, refrigerant cylinders and parts all day.
- Pollution liability. Often separate from general liability. Worth asking about for refrigerant and mold-related work.
- Umbrella or excess. Common for larger buildings or rooftop work.
What Changes When the Work Is on a Rooftop Unit?
Rooftop units add three problems: falls, roof damage and water intrusion. A technician walks across a membrane roof carrying a compressor, punctures it, and the next rainstorm leaks into the top-floor units and a tenant's office below. Or a technician slips near the roof edge.
Here is how the coverage lines map. A fall by an employee should go to workers' compensation. A fall by an uninsured helper or a subcontractor may be headed toward the owner. Roof damage and the leak that follows is a general liability question, with completed operations relevant if the leak appears days later. Some roofs also carry manufacturer warranties that can be voided by unauthorized penetrations, which is a contract matter for your attorney, not an insurance one. Many managers require roof access to be authorized in advance and require that the HVAC company name them as additional insured for the visit.
If the contractor subs part of the work, such as a crane lift or a sheet metal fabricator, ask whether the subcontractors carry their own coverage. Our subcontractor insurance checklist covers it.
Why Do Refrigerant and Pollution Exposures Matter?
Standard general liability policies commonly carry pollution exclusions. HVAC work touches several pollutant-type risks: refrigerant releases, condensate that leads to mold, and old equipment containing materials that require special handling. A technician cuts into an aged line set and releases refrigerant in a closed mechanical room. Or a clogged condensate line saturates a closet wall for weeks, and the resident's mold claim arrives later.
Whether the HVAC contractor's policy responds depends on its exclusions, and a certificate will not show them. Ask the contractor's agent in writing which pollution exclusions apply, and ask your own agent whether a separate pollution requirement makes sense for the work you assign. Keep the answer in the vendor file. Regulatory handling rules for refrigerants are a licensing matter. Confirm them with your attorney or the relevant agency rather than assuming the insurance covers compliance.
Why Commercial Auto Is Often Overlooked on HVAC Vendors
HVAC companies are fleet businesses. A van backs into a resident's car in your lot, or a technician hits a pedestrian while pulling out of a loading area. The certificate you collected shows general liability and comp, but the vehicle is not covered by either. Many managers add commercial auto to the requirement list, commonly at $1 million combined single limit, and confirm the number with their agent. Small contractors using personal vehicles are the usual gap.
Which HVAC Jobs Call for Which Coverage?
| Job | Main exposure | What to confirm |
|---|---|---|
| Thermostat or filter service in a unit | Low, in-unit damage | GL in force, vendor on file |
| Furnace or condenser replacement | Fire, gas, water damage | Completed operations, license, limits |
| Rooftop unit service or replacement | Falls, roof damage, leaks, crane lifts | WC, additional insured, higher limits or umbrella |
| Refrigerant line or chiller work | Release, pollution exclusion | Pollution coverage question for the agent |
| Condensate or duct cleaning | Mold and water damage claims | Mold and water exclusions |
A prompt for your agent, not a rule. Exclusions and requirements vary by carrier and state.
What Should You Check on the HVAC Certificate?
- Named insured matches the licensed company you contract with.
- Policy dates are current, and you have recorded each expiration.
- General liability and auto limits meet your standard.
- Your company and the owner appear as certificate holder, and additional insured if required. See blanket vs scheduled additional insured.
- Workers' comp is shown, or the exclusion is documented.
- Umbrella and pollution coverage are shown if you require them for the job.
Should You Treat a Maintenance Contract Differently?
A yearly service contract with one HVAC company across your properties is the best case: one vendor, one certificate, many sites. Tag the vendor to each property so you can see which buildings are exposed if the policy lapses. Insurance review should happen at contract renewal, not only when you first hire.
COI File reads the ACORD 25 with AI extraction, checks it against your requirement rules, supports property and project tagging, and sends renewal emails at 30, 14 and 7 days. Try it with a 7-day free trial, no credit card required. For more on setting up expiration tracking, see how to set up a COI expiration tracking system.
Frequently Asked Questions
Related Resources
Firdaosh Bano
COI Compliance Specialist
Firdaosh Bano is a COI compliance specialist and the founder of COI File. She spent 6 years managing vendor compliance for commercial properties - tracking 2,000+ COIs across 150+ properties in spreadsheets before building the tool she wished she'd had. She writes about certificate of insurance compliance, vendor risk management, and making insurance tracking less painful for small teams.